Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
To remove the RH and LH sliding guides from the wire support:
•
Find the safety locks. These are the tabs that clip over the fixing wire (arrow 1 in fig. 6.5).
•
Pull the safety locks away from the fixing wire to release the sliding guide (arrow 2 in fig. 6.5).
Cleaning the sliding shelf supports:
•
Wipe the supports with a damp cloth and a mild detergent only.
•
Do not wash them in the dishwasher, immerse them in soapy water, or use oven
cleaner on them.
GREASE FILTER (some models only)
•
A special screen can be fitted at the
back of the oven to catch grease
particles, mainly when meat is being
roasted.
Slide in the grease filter on the back of
the oven as in fig. 6.6.
•
Clean the filter after any cooking!
The grease filter can be removed
for cleaning and should be washed
regularly in hot soapy water.
Always clean the filter after cooking as
any solid residues on it might adversely
affect the oven performance.
•
Always dry the filter properly before
fitting it back into the oven.
CAUTION: When baking pastry etc. this
filter should be removed.
48
48
1
2
1
Fig. 6.5
Fig. 6.6
Publicité
Table des Matières
