Chap.1 – General information
Chap.2 – Limits of use
Chap.3 – Hydraulic Installation
Chap.4 – Priming of the group
Chap.5 – Electric connection
Warnings for the safety of users and objects.
Pay particular attention to the signs and their symbols
DANGER
Risk of electrical
discharge.
DANGER
WARNING
L'utilisation de cet appareil n'est pas prévu par les personnes (y compris les enfants) avec des
capacités physiques, sensorielles ou mentales réduites, ou bien sans expérience et connaissance,
DANGER
sauf en cas de supervision ou de formation par l'intermédiaire d'une personne responsable
garantissant la sécurité quant à l'utilisation de l'appareil.
Il faut surveiller les enfants afin qu'ils ne jouent pas avec cet appareil.
CAUTION: before assembling, carefully read the contents of this manual. The nonobservance of the instructions
will result in the annulment of the warranty.
Chap.1 – General Information
Our pressurization groups must be installed in premises protected against bad weather and frost, well ventilated and
in a non dangerous atmosphere. Each of our groups is entirely tested in our establishments.
Upon delivery, check that the group has not suffered any damage during transportation; in this case, contact immediately
the retailer. In case of claims, contact immediately the retailer within eight days of purchase.
Chap.2 – Limits of use
Our pressurization groups are constructed for the raising clean water without solid suspended particles or abrasive
materials.
WARNING
WARNING
MAXIMUM TEMPERATURE OF THE LIQUID PUMPED
MAXIMUM/MINIMUM AMBIENT TEMPERATURE
Chap.3 – Hydraulic installation
Fig.2 shows the assembly diagrams normally used.
DANGER
Risk of electrical
discharge.
In the case where the pressurization group is fed by a tank, avoid any unpriming phenomena; we recommend to
control the following characteristic data:
- static level (initial level of the well)
- dynamic level (level reached during the group operation)
- flow rate
CONTENTS
Chap.6 – Starting up
Chap.7 – Varation of operational parameters
Chap.8 – Units whit periodic autotest
Chap.9 –
GENERAL SAFETY WARNINGS
The nonobservance of instructions may lead to risk of electrical
discharge.
The nonobservance of instructions may cause damage to people and/
or things.
The nonobservance of the instructions may lead to damage of the motor
pump.
The group is not suitable for pumping chemically aggressive or
inflammable liquids.
Avoid any dry-operating of the motor pump.
All the assembly operations must be carried out with group
disconnected from the power grid.
Trouble shooting
40°C
40°C
GB
17