Pentair NOCCHI SENSORMAT Serie Manuel D'utilisation Et D'entretien page 29

After choosing the parameter press key (18)
TIMING
PUMP N.2 S.040
- Line n. 1 TIMING
No parameter
- Line n. 2 PUMP N. 2 s.
+
With keys (16) or (17)
This means that the pump will be stopped XXX seconds after having reached the maximum pressure set.
In the case of this example it is for 40 seconds.
After choosing the parameter press key (18)
TIMING
PUMP N.3 S.040
- Line n. 1 TIMING
No parameter
- Line n. 2 PUMP N. 3 s.
+
With keys (16) or (17)
This indicates that the pump will be stopped XXX seconds after having reached the maximum pressure set.
In the case of this example it is for 40 seconds.
After choosing the parameter press key (18)
TIMING
PUMP N.4 S.040
- Line n. 1 TIMING
No parameter
- Line n. 2 PUMPS N. 4 s.
+
With keys (16)
This indicates that the pump will be stopped XXX seconds after having reached the maximum pressure set.
In the case of this example it is for 30 seconds.
After choosing the parameter press key (18)
SERIALE ATT. NO
- Line n. 1 SERIAL ATT
+
With keys (16) or (17)
YES means that the unit can send and receive data through a serial connection.
CURRENTLY NOT AVAILABLE
- Line n. 2 no message
ENTER
-
it is possible to set the parameter to anything between 0 and 255 seconds.
ENTER
-
it is possible to set the parameter to anything between 0 and 255 seconds.
ENTER
-
or (17) it is possible to set the parameter to anything between 0 and 255 seconds
ENTER
-
it is possible to set the parameter to anything between from 0 and 255 seconds
the following message will appear:
the following message will appear:
the following message will appear:
the following message will appear:
GB
27