WARNINGS AND IMPORTANT SAFETY PRECAUTIONS
SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS PUMP
AND SAND FILTER IS NOT INSTALLED AND USED CORRECTLY.
INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST
READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE
USING THIS PUMP AND SAND FILTER.
This pump and sand filter system is intended for use in swimming
pool applications.
Most states and local codes regulate the construction, installation, and
operation of public pools and spas, and the construction of residential pools
and spas. It is important to comply with these codes, many of which directly regulate the
installation and use of this product. Consult your local building and health codes for more
information.
IMPORTANT NOTICE
("Guide") contains important information about the installation, operation and safe
use of this pump and sand filter. This Guide should be given to the owner and/or
operator of this equipment.
can result in severe injury, death, or property damage. Call (800) 831-7133 for additional free
copies of these instructions. Please refer to www.pentair.com for more information related to
these products.
Water temperature in excess of 100° F (37.7° C) may be hazardous to your
health. Prolonged immersion in hot water may induce hyperthermia.
Hyperthermia occurs when the internal temperature of the body reaches a
level several degrees above normal body temperature of 98.6° F (37° C.).
Effects of hyperthermia include: (1) Unawareness of impending danger. (2)
Failure to perceive heat. (3) Failure to recognize the need to leave the spa. (4)
Physical inability to exit the spa. (5) Fetal damage in pregnant women. (6)
Unconsciousness resulting in danger of drowning. The use of alcohol, drugs, or
medication can greatly increase the risk of fatal hyperthermia in hot tubs and
spas.
Maximum working water temperature for this filter is 95° F (35°C).
To reduce the risk of injury, do not permit children to use or operate this
pump and sand filter.
When setting up pool water turnovers or flow rates the operator must
consider local codes governing turnover as well as disinfectant feed ratios.
DO NOT increase pump size; this may increase the flow rate through the
system and exceed the maximum flow rate stated on the drain cover.
If this pump and sand filter is intended for use in other than single-family
dwellings, a clearly labeled emergency switch shall be provided as part of the
installation. The switch shall be readily accessible to the occupants and shall
be installed at least 5 feet (1.52 m) away, adjacent to, and within sight of, this
pump and sand filter system.
- Attention Installer: This Installation and User's Guide
Before installing this product, read and follow all warning notices
and instructions in this Guide. Failure to follow warnings and instructions
Pump and Sand Filter System Installation and User's Guide
i