Publicité
Compatibility
The compounds contain minimal levels of fl uorine, chlorine,
sulphur compounds and heavy metals and are designed
specifi cally to be compatible with stainless steels and other
engineering alloys and not to compromise future corrosion
behaviour should traces of replicas remain after replication.
Operating the 50 ml Dispensing System
Cartridge clip
Dispenser
handle
Assembly
• Fit the "spade" end of the piston slide into the handle side of the
dispenser.
• Raise the slide release lever and push the slide back until the
piston contact the dispenser body.
• Raise the cartridge clip and slide the cartridge into position with
the appropriate pistons opposite each other. Lock the cartridge
in position using the cartridge clip. Push the piston slide until it
contacts the cartridge.
• Remove end cap from cartridge (twist counter-clockwise) and
operate dispensing gun until compound issues from both cart-
ridge ports. Wipe the end of the cartridge. Alternatively, discard
the fi rst 2-3 cm of compound coming out of the mixing nozzle.
• Attach a mixing nozzle to the cartridge. The nozzle will fi t easily if
it is oriented correctly. A quarter turn will secure the nozzle to the
cartridge.
Dispenser body
Piston slide
Slide release lever
Publicité
