Electrical Connection - aqua technix AQUA AQ 280 Installation

5.4

Electrical connection

WARNING! Risk of electric shock due to incorrect connection!







08/2015 VG 766.2050.052
Observe VDE and utility company regulations.
Install systems for swimming pools and their protection areas
according to DIN VDE 0100-702.
Install a switch (at least 3 mm contact opening per pole) to interrupt
the power supply.
Protect power supply with a ground fault circuit interrupter (nominal
residual current IΔ
N
Only use suitable connection types according to regional
regulations.
Adjust the minimum diameter of the pipes to the motor output and
pipe length.
If hazardous situations can occur, provide emergency off switch
according to DIN EN 809.
≤ 30 mA).
Installation
EN 49