Regular Backwashing; Backwash; Rinse - aqua technix AQUA AQ 280 Installation

Regular backwashing

7 Regular backwashing
Filter backwashing should be carried out at least once a week
depending on the load and for hygiene reasons.
If there´s a higher strain on the pool, shorten the backwash intervals!
Attention: After backwashing please top up the swimming pool
with fresh water.
7.1

Backwash




7.2

Rinse

Any remaining contamination and dirt has to be discharged into the
waste water system using the "RINSE" position.
A rinsing time of about 30 secs is sufficient.
52 EN VG 766.2050.052
6-way valve (10) in the "BACKWASH" position
Switch the pump (40) on
Duration of the backwash process:
Maximum of approx. 3 min! It is completed when clean water is
pumped.
08/2015