Installation; Installation Instructions; Required Tools; Drain Valve - aqua technix AQUA AQ 280 Installation

5

Installation

5.1

Installation instructions

5.1.1

Required tools






5.1.2

Drain valve

The drain valve (items no. 21-27) is mounted on the filter casing (2). To
do so, slide the O-ring (21) over the buttress thread, as well as the
O-ring (24) over the thread G 3/4" of the valve (22). Now the valve (22)
is screwed tight with the O-rings to the filter casing (2). Press the flat
gasket (25) into the mount (26) and place this combination together into
the screw adapter G 3/4" (27). This complete unit now has to be
screwed onto the inch thread of the drain valve (22).
Design of the drain valve
08/2015 VG 766.2050.052
Pipe wrench
Screwdriver
Rubber mallet
Hand saw
Cutting knife
24
25
26
27
2
21
22
Installation
WG23.400.003-P
EN 41