Protective Equipment; Structural Modifications And Spare Parts; Signs; Residual Risk - aqua technix AQUA AQ 280 Installation

Safety
3.4

Protective equipment

Reaching into moving parts (e.g. fan) can cause serious injury.

3.5

Structural modifications and spare parts

Alterations or modifications can affect operational safety.


3.6

Signs


3.7

Residual risk

3.7.1

Pressure load




3.7.2

Rotating parts

There is a risk of shearing and crushing due to exposed rotating parts.



36 EN VG 766.2050.052
Never operate the pump without protective covers.
Never modify or alter the filter system without the manufacturer's
permission.
Use only original spare parts and accessories authorised by the
manufacturer.
Ensure that all the signs on the complete system are legible.
If air is trapped in the filter body, it has to be evacuated.
Do not operate the filter system above the admissible operating
pressure.
The filter casing should not be connected to the domestic water
network (because of excess pressure).
Perform service only when the pump is not in operation.
Prior to servicing, guarantee the pump cannot be switched back on.
Immediately after finishing servicing, reattach or reactivate all
protective equipment.
DANGER
Dangerous pressure!
Can result in serious
injury or serious
material damage
through bursting of the
casing.
Before start-up:
1. Switch off pump
2. Depressurise the
system
08/2015