Remote Slave Flash Mode Settings; Setting The Slave Channel - Metz mecablitz 64 AF-1 digital Mode D'emploi

10.2.1 Remote slave flash mode settings

• Switch on the flash unit with the
button.
The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
TTL
used last (e.g. TTL flash mode).
• Press the displayed mode of operation on
the touch display as many times as it takes
0.6- 7.2 m
for the display for selecting the mode of
M-
5,6
m
35
Zoom F operation to appear.
m
EV
O
MODE
• Press the
REMOTE MASTER
touch display and select
REMOTE SLAVE
SERVO
p
q
k
• Press the
the touch display.
Gr Ch
REMOTE
Remote slave mode is set.
SLAVE A 1
M-
Zoom 35 m
m
In addition, the selected slave group (e.g. A)
and the remote channel (e.g. CH 1) are
displayed.
192
sensor buttons on the
REMOTE SLAVE
.
REMOTE SLAVE
sensor button on

10.2.2 Setting the slave channel

Gr Ch
REMOTE
SLAVE A 1
• Press the sensor button on the touch
display for the channel group (e.g.
M-
Gr A I Ch1
Zoom 35 m
m
channel and group appears.
O
SLAVE
• Press the sensor buttons on the touch
CHANNEL
display for the channel
GROUP
O
CHANNEL
• Press the
CHANNEL 1
touch display and select the desired
CHANNEL 2
channel.
CHANNEL 3
• Press the selected channel on the touch
display.
p
q
Gr Ch
REMOTE
SLAVE
A 2
The setting will take effect immediately.
M-
"CH2" appears on the display.
Zoom 35 m
m
). The window for selecting the
CHANNEL
.
sensor buttons on the