Remote Slave Flash Mode Settings; Setting The Slave Channel - Metz mecablitz 52 AF-1 Canon digital Mode D'emploi

10.2.1 Remote slave flash mode settings

• Switch on the flash unit with the
E TTL
-3,5 m
0,3
• Press the displayed mode of operation on
m
Z
F4.0
35
OOM
m
EV
INFO
1
+ 1/3
MASTER
SLAVE
• Press the
SERVO
MASTER
k
SLAVE
• Press the
SERVO
REMOTE CH
In addition, the selected slave group (e.g. A)
A
SLAVE 1
and the remote channel (e.g. CH 1) are dis-
played.
Z
35 mm
OOM
EV
INFO
172
button.
The start screen appears. Thereafter, the
flash unit always switches on with the
mode of operation that was used last (e.g.
M flash mode).
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
sensor buttons on the
touch display and select "SLAVE".
SLAVE
sensor button on the
touch display. Remote slave mode is set.

10.2.2 Setting the slave channel

• Press the sensor button on the touch
display for the channel group (e.g.
). The window for selecting the channel and
group appears.
• Press the sensor buttons on the touch
display for the channel "CH".
• Press the sensor buttons on the
touch display and select the desired
channel.
• Press the selected channel on the touch
display.
The setting will take effect immediately.
A I CH1