Servo Mode; Setting Servo Flash Mode; Pre-Flash Suppression Or Synchronisation Settings - Metz mecablitz 64 AF-1 digital Mode D'emploi

10.4 SERVO mode

SERVO mode is a simple slave mode without
or with complete pre-flash suppression in
which the slave flash unit always triggers
a flash as soon as the camera flash unit
receives a light pulse.
In SERVO mode, only manual flash mode is
possible. Manual flash mode is automatically
activated after switching to SERVO mode.

10.4.1 Setting SERVO flash mode

• Set the camera to TTL mode.
TTL
• Press the sensor button of the displayed
0.6- 7.2 m mode of operation on the touch display as
many times as it takes for the display for
M-
5,6
m
35
Zoom F
selecting the mode of operation to appear.
m
EV
k
O
MODE
• Press the
touch display and select
REMOTE SLAVE
• Press the
SERVO
touch display.
The mode of operation is adopted.
p
q
If desired, partial light output can be set,
see 10.4.3.
SYNC
M-Servo
M-
m
Zoom 35
m
P
1/1
194
sensor buttons on the
SERVO
.
SERVO
sensor button on the
10.4.2 Pre-flash suppression or
synchronisation settings
SYNC
M-Servo
• Set the camera to TTL mode.
M-
• Press the sensor button
m
Zoom 35
display as many times as it takes for the
m
display for selecting the type of synchroni-
P
sation.
1/1
• Press the sensor button on the touch
O
display:
SYNC
synchronisation without pre-flash
synchronisation with pre-flash
The synchronisation of operation is adopted.
If the synchronisation set here does not work
LEARN
properly, then proceed as described in
10.4.4.
SYNC
on the touch