Using The Cooling Device; Latching The Cooling Device Lid - Mobicool MCF 32 Instructions De Montage Et De Service

MCF32, MCF40, MCF60, FR40 AC/DC
6.5

Using the cooling device

A
NOTICE! Damage hazard
Place the cooling device as shown (fig. 1, page 3). If you operate
the cooling device in a different position it can be damaged.
1. Place the cooling device on a firm foundation.
2. Connect the cooling device, see chapter "Connecting the cooling device"
on page 13.
A
NOTICE! Hazard from excessively low temperature
Ensure that only those objects are placed in the cooling device
that are intended to be cooled at the selected temperature.
3. Press the "ON/OFF" button for between one and two seconds.
✔ The "POWER" LED lights up.
✔ The display switches on and shows the current cooling temperature.
I
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
✔ The cooling device starts cooling the interior.
I
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED "POWER" flashes
orange.
To avoid food waste, note the following:
 Keep temperature fluctuation as low as possible. Only open the cooling
device as often and for as long as necessary. Store the foodstuff in such a
way that the air can still circulate well.
 Adjust the temperature to the quantity and type of the foodstuff.
 Foodstuff can easily absorb or release odor or taste. Always store food-
stuff covered or in closed containers/bottles.
6.6

Latching the cooling device lid

1. Lift the latch (fig. 1 1, page 3) and close the lid.
EN
Operation
15