Operating The Cooling Device Safely - Mobicool C40AC Notice D'utilisation

C40
• If the cooling device is connected to the DC outlet: Disconnect
the cooling device or switch it off when you turn off the engine.
Otherwise you may discharge the battery.
• The cooling device is not suitable for transporting caustic
materials or materials containing solvents.
• The insulation of the cooling device contains flammable cyclo-
pentane and requires special disposal procedures. Deliver the
cooling device at the end of its life-cycle to an appropriate recy-
cling.
2.2

Operating the cooling device safely

!
CAUTION!
• Before starting the cooling device, ensure that the power supply
line and the plug are dry.
A
NOTICE!
• Do not use electrical devices inside the cooling device unless
they are recommended by the manufacturer for the purpose.
• Do not place the cooling device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
• Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that arises during operation does not build up. Make sure
that the cooling device is sufficiently far away from walls and
other objects so that the air can circulate.
• Ensure that the ventilation openings are not covered.
• Do not fill the inner container with ice or fluid.
• Never immerse the cooling device in water.
• Protect the cooling device and the cable against heat and mois-
ture.
EN
Safety instructions
7