Replacing The Fuse; Cleaning And Maintenance; Warranty - Mobicool MCF 32 Instructions De Montage Et De Service

Masquer les pouces Voir aussi pour MCF 32:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
MCF32, MCF40, MCF60, FR40 AC/DC
A
NOTICE! Damage hazard
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooling device, proceed as follows:
1. Take out the contents of the cooling device.
2. If necessary, place them in another cooling device to keep them cool.
3. Switch off the cooling device.
4. Leave the lid open.
5. Wipe off the defrosted water.
6.11

Replacing the fuse

➤ Replace the fuse (8 A 32 V) as shown (fig. 4, page 4).
7

Cleaning and maintenance

A
NOTICE! Damage hazard
 Never clean the cooling device under running water or in dish
water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooling device.
➤ Occasionally clean the cooling device interior and exterior with a damp
cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
8

Warranty

The statutory warranty period applies. If the product is defective, please
contact your retailer or the manufacturer's branch in your country (see
dometic.com/dealer).
For repair and warranty processing, please include the following documents
when you send in the product:
 A copy of the receipt with purchasing date
EN
Cleaning and maintenance
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mcf 40Mcf 60Fr 40 ac/dcMcf 32 ac/dcMcf 40 ac/dcMcf 60 ac/dc

Table des Matières