Operating The Device Safely; Intended Use - Mobicool S13 DC Manuel D'utilisation

_S13_S32_CAN.book Seite 6 Donnerstag, 25. Oktober 2007 3:04 15

Intended use

1.2

Operating the device safely

Before starting the device, ensure that the power supply cable
a
and the plug are dry.
Do not place the device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.)
Caution! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that arises during operation does not build up. Make sure
that the device is sufficiently far away from walls and other
objects so that the air can circulate.
Do not fill the inner container with ice or fluid.
Never immerse the device in water.
Protect the device and the cable against heat and moisture.
You may find a few water drops inside the cooler after the cool-
ing for some time. This is a normal effect because moisture or
humidity in the air condense into water drops when the temper-
ature inside the cooler cools down. The device is not defective.
Use a dry cloth to wipe off the water drops, if any.
Do not touch exposed cables with your bare hands. This espe-
cially applies when operating the device with an AC mains
power supply. Danger of fatal injuries!
MOBICOOL cannot be held liable for damage resulting from
improper usage or incorrect operation.
2 Intended use
The cooling device is suitable for cooling foodstuffs.
The device is designed for operation on:
A 12 V DC vehicle-electrics socket of a car (cigarette lighter), boat or
caravan.
The appliance may also be used for camping use. The appliance shall not to
be exposed to rain.
Caution!
a
If you wish to cool medicines, please check if the cooling capacity
of the device is suitable for the medicine in question.
6
S13 DC, MB32 DC