Operating The Cooler; Energy Saving Tips; Using The Cooler - Mobicool A40 Notice D'utilisation

A40
The device cools with a maintenance-free absorber circuit. Concentrated
ammoniac solution is heated in a boiler and then driven out in gaseous form.
The gas which is subjected to high pressure, is liquefied in a condenser and
then evaporated by adding hydrogen. This removes warmth in the cooling area.
6

Operating the cooler

!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
I
NOTE
Before starting your new cooler for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 16).
6.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
 Arrange the food in the cooler so that air can circulate inside.
6.2

Using the cooler

A
NOTICE!
 Ensure that the objects placed in the cooler are suitable for
cooling to the selected temperature.
 Ensure that food or liquids in glass containers are not exces-
sively refrigerated. Liquids expand when they freeze and can
thus destroy the glass containers.
EN
All manuals and user guides at all-guides.com
Operating the cooler
11