Operating The Cooling Device Safely - Mobicool BA 40 AC Notice D'utilisation

Safety instructions
 Food may only be stored in its original packaging or in suitable
containers.
A
NOTICE!
 Check that the voltage specification on the type plate
corresponds to that of the energy supply.
 Only connect the cooling device as follows:
– With the DC connection cable to a DC power supply in the
vehicle
– Or with the AC connection cable to the AC power supply
 Connect the cooling device with the AC connection cable to the
AC power supply.
 Never pull the plug out of the socket by the cable.
 If the cooling device is connected to the DC outlet: Disconnect
the cooling device and other power consuming devices from the
battery before connecting a quick charging device.
 If the cooling device is connected to the DC outlet: Disconnect
the cooling device or switch it off when you turn off the engine.
Otherwise you may discharge the battery.
 The cooling device is not suitable for transporting caustic
materials or materials containing solvents.
 The insulation of the cooling device contains flammable cyclo-
pentane and requires special disposal procedures. Deliver the
cooling device at the end of its life-cycle to an appropriate recy-
cling.
2.2

Operating the cooling device safely

!
CAUTION!
 Before starting the cooling device, ensure that the power supply
line and the plug are dry.
A
NOTICE!
 Do not use electrical devices inside the cooling device unless
they are recommended by the manufacturer for the purpose.
 Do not place the cooling device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
6
B40 AC/DC
EN