General Information; Contact Address; Warranty; Information On The Internet - Burkert 2000 Manuel D'utilisation

General hazardous situations.
To prevent injuries:
• Supply only media to the media connections which have been
specified as flow media in the chapter "Technical Data".
• Do not physically stress the housing (e.g. by placing objects on
it or standing on it).
• Ensure that the system cannot be activated unintentionally.
• Only trained technicians may perform installation and mainte-
nance work.
• After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• The device may be operated only when in perfect condition and
in consideration of the operating instructions.
• The general rules of technology apply to application planning
and operation of the device.
The angle seat valve Type 2000 INOX was developed with
due consideration given to the accepted safety rules and
is state-of-the-art. Nevertheless, dangerous situations may
occur.
6
english
Type 2000 INOX

General information

4. GENERAL INFORMATION

4.1. Contact address

Germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Germany
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
Email: info@de.buerkert.com
International
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet at: www.burkert.com

4.2. Warranty

The warranty is only valid if the device is used as intended in accor-
dance with the specified application conditions.

4.3. Information on the Internet

The operating instructions and data sheets for Type 2000 INOX can
be found on the Internet at: www.burkert.com