General Information; Contact Addresses - Burkert PTB 07 ATEX 2063 X Mode D'emploi

07 ATEX 2063 X

General Information

WARNING!
General hazards!
• Do not use the valve fitting or the complete device as a lever to
screw the valve into the line system.
• Do not put any loads on the housing (e.g. by placing objects on
it or standing on it).
• Do not make any external modifications to the device housings.
Do not paint the housing parts or screws.
Unintentional activation or unauthorised impairment of the system
may cause general hazardous situations through to physical injury.
• Take appropriate measures to prevent the system from being
accidentally actuated!
• Do not make any unauthorised changes to the system.
Non-observance of the generally acknowledged safety rules may
cause general hazardous situations through to physical injury.
• Observe the generally acknowledged safety rules for resource
planning and operation of the coil AC19 and the associated
solenoid valve.
The coil AC19 was developed with due consideration
given to the accepted safety rules and is state-of-the-art.
However, dangers can still arise.
Operate the coil AC19 and the associated solenoid valve in
perfect working order only and in accordance with the operating
instructions.
4. GENERAL INFORMATION

4.1. Contact addresses

Germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
International
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet at:
www.burkert.com
english
7