Interval; Memory; Keep-Warm Function; Display Warnings - ARENDO 303528/20190108FS002 Mode D'emploi

11. Pause
Once the program begins, the operation can be paused at any time
using the "START / STOP" button. The previously adjusted times are
retained.
The program will resume automatically after 10 minutes or when
the "START / STOP" button is pressed again.

12. Memory

If the power supply to the appliance is interrupted, the operation
that was previously active can be automatically resumed within 10
minutes. The bread machine can not store the data if the interrup-
tion lasts for more than 10 minutes. In this case it is advisable to
remove the ingredients from the baking mould, dispose of them
and to use new ingredients.

13. Keep-warm function

The contents of the bread machine can be automatically kept warm
up to an hour after baking. If you want to remove the contents dur-
ing the keep-warm phase, first turn off the program that is currently
active by pressing and holding the "Start / Stop" button until the
program ends.

14. Display warnings

If the display shows the code "HH: H", then the temperature inside
the bread machine is too high. The current program needs to be
terminated. Open the lid of the appliance and allow the machine to
cool down completely. The code "LL:L" means that the temperature
inside the appliance is too low. Allow the appliance to warm up to
room temperature.
But if the display shows "E E0", "E E1", or "E E2" after you press the
"Start / Stop" button, then the temperature sensor is damaged and
has to be checked by a qualified service technician.
41
English