Affichage Des Propriétés D'une Dcu Individuelle - Sun Oracle SPARC M5-32 Guide D'administration

tpm
Properties:
autorestart = none
autorunonerror = none
dcus_assignable = /SYS/DCU0 /SYS/DCU1 /SYS/DCU2 /SYS/DCU3
dcus_assigned = /SYS/DCU0
dcus_available = /SYS/DCU1
expandable = true
gm_version = GM 1.3.0.build_22a_aa2b8029fa58 2012/12/11 18:46 [m4_m5-glued:debug]
2012/12/11, 18:46
hostconfig_version = Hostconfig 1.3.0.build_22a_aa2b8029fa58 2012/12/11 18:02
[m4_m5-32:debug]
hypervisor_version = Hypervisor 1.12.0.build_22a_0624f45e1e44 2012/12/11 18:36
[great:m4_m5-platform:debug]
ioreconfigure = true
keyswitch_state = Normal
macaddress = 00:21:28:9a:ef:7c
obp_version = OpenBoot 4.35.0.build_22 2012/12/06 15:02
post_version = POST 5.0.0.build_22_9b17d1e17642 2012/12/10 14:28
power_state = On
send_break_action = (Cannot show property)
sp_name = /SYS/SPP0
state_capture_on_error = enabled
state_capture_status = enabled
status = Powered On
status_detail = 20121220 16:09:27: Start Host in progress: Step 4 of 9
sysfw_version = Sun System Firmware: dev build jmc@sca-rh5-0 (r77760) Tue Dec 11
19:54:05 PST 2012
Informations connexes
• "Commandes de configuration et de surveillance de domaine physique" à la page 152
▼ Affichage des propriétés d'une DCU individuelle
• Affichez l'état d'intégrité et les propriétés d'une DCU donnée.
->
show /System/DCUs/DCU_0
/System/DCUs/DCU_0
Targets:
CMU_0
CMU_1
CMU_2
CMU_3
Properties:
health = OK
health_details = -
power_state = On
cpu_summary = Eight Oracle SPARC M6
memory_summary = 4096 GB
location = DCU0 (Domain Configuration Unit 0)
host_assigned = /HOST0
fan_list = FM6/FAN0 (Fan Module 6 Fan 0), FM6/FAN1 (Fan Module 6 Fan 1),
FM7/FAN0 (Fan Module 7 Fan 0), FM7/FAN1 (Fan Module 7 Fan 1),
168 Serveurs SPARC M5-32 et SPARC M6-32 · Guide d'administration · Décembre 2014