Additional Instructions; Disposal; Decommissioning And Dismantling - Eurosystems P130 Traduction Du Manuel D'origine

9. ADDITIONAL INSTRUCTIONS

9.1. DISPOSAL

At the end of its life cycle the product must
be disposed of following the sorted dis-
posal regulations currently in force and it
can not be treated as simple urban refuse
waste.
The product must be disposed of at ded-
icated waste disposal areas or it must be
returned to the dealer if you wish to ex-
change it for a new equivalent.
The manufacture will bear the cost for the
disposal of the product as required by law.
The product consists of parts that are not
biodegradable and substances that can
pollute the surrounding environment if not
disposed of properly. Furthermore some
of these materials can be recycled avoid-
ing polluting the environment. It is your
and our duty to contribute to the health of
the environment.
The symbol shows that the product
meets requisites required by the new di-
rectives introduced to protect the environ-
ment (2012/195/EU) and that can be dis-
posed of in an appropriate way at the end
of its life cycle.
Ask your local authorities for information
about the areas dedicated to waste dis-
posal.
People who do not dispose of the product
according to what is indicated in this par-
agraph will answer for it under the terms
of the law.
9.2. DECOMMISSIONING AND
DISMANTLING
The decommissioning and dismantling of
the doubled-bladed 140 cm Mowing Bar
accessory consists of the product being
dismantled by authorised qualified per-
sonnel in compliance with the require-
ments of Legislative Decree 81/08 (Use
of PPE etc.) and subsequent segregation
and disposal as shown in paragraph 9.1 of
this user manual.
EN-17