Definitions; Safety Instructions; Work Area And Hazard Zone - Eurosystems P130 Traduction Du Manuel D'origine

or damage to the machine.
INFORMATION:
This symbol points up special indications
for greater clarity and ease of use.

1.10. DEFINITIONS

An accessory is defined as a tool to whi-
ch the machine transmits a motion by me-
ans of a power take off (PTO) or another
device. Examples of accessories are the
mower, cutter, snow-blower, etc.
We can consider an implement/tool an
application without any moving organ. For
example, the snow blade and the tran-
sport tank for material.

2. SAFETY INSTRUCTIONS

DANGER!
Before installing and commissioning
the machine, read and understand ca-
refully this operation and maintenance
manual as well as the machine's opera-
tion and maintenance manual.
This machine meets all the European
standards in force during production.
Despite this, improper use or inadequate
maintenance might increase the risk of ac-
cident.
In order to reduce such a risk, carefully
read the safety instructions shown below
and pay attention to the danger symbols
on the following pages.
Integrate these instructions with the spe-
cific "ESM" operation and maintenance
manual supplied.

2.1. WORK AREA AND HAZARD ZONE

The user is responsible for the safety of
people, property and animals that are in-
side the machine's danger area.
This zone is defined as the area within a
circumference of a minimum radius of 10m
with the centre being the tool fitted on the
machine [ fig. 02] .
CARE!
The danger zone described in this pa-
ragraph delates and replaces the one
present in the USE AND MAINTENANCE
MANUAL of the P130 model.
When the machine is working being in the
danger area is not allowed for any reason.
Only the operator who has read and thor-
oughly understood the whole manual is
EN-5