Lifting; Handling; Instructions For Use; Tool/Accessory Connection - Eurosystems P130 Traduction Du Manuel D'origine

pletely by raising it;
• Cut any ties on the bottom;

4.3. LIFTING

[ fig. 05]
DANGER!
Only use systems, devices and instru-
ments that are suitable for lifting mass-
es that are equal or above what is in-
dicated in the "Machine Specifications"
chapter.
DANGER!
Do not walk or remain under loads be-
ing moved.
CARE!
Do not use lifting systems or devices
with sharp parts.
DANGER!
Before using lifting ropes or bands,
check how strong they are. In case of
damage, even partial they must be re-
placed.
CARE!
Never lift the machine when it is con-
nected to an accessory or piece of tool.
Lift the accessory using a hoist or similar
with a minimum capacity compatible with
the data indicated in the "Accessory
EN-8
specifications" chapter. Hook as shown in
[ fig. 05].

4.4. HANDLING

Move the accessory only when attached
to the P130 machine.
If you have a van with crane, follow
the lifting instructions indicated in the
previous paragraph.
DANGER!
Never lift the accessory when attached
to the machine.
DANGER!
It is compulsory to handle (transport, li-
fting, etc.) the accessory with the blade
guard (1) of always mounted.

5. INSTRUCTIONS FOR USE

DANGER!
Before using the machine read and un-
derstand carefully this operation and
maintenance manual and the machine's
operation and maintenance manual.

5.1. TOOL/ACCESSORY CONNECTION

[ fig. 06, 6A - 6C ]
After positioning the accessory on the