Accessory Specifications; Instructions For Handling; Packaging Handling; Unpacking The Machine - Eurosystems P130 Traduction Du Manuel D'origine

Do not touch the moving parts (belts
and pulleys). Wait for it come to a
complete stop and keep at a safety
distance.
Attention! Use gloves when lifting
following the instructions in this
manual.

3. ACCESSORY SPECIFICATIONS

1. Package dimensions: 158x132xH57
(cm.)
2. Accessory overall dimensions:
154x126xH41 (cm.)
3. Features: Double-bladed with ESM
sections, 140 cm cutting width.
4. Cutting speed: approximately 800 rpm.
5. Adjustments: Adjustable cutting height
from a minimum of 35 mm to a maximum
of 65 mm.
6. Oil/grease:
Compression-resistant lubricating grease
or food grade grease to allow mowing of
food grade products.
7. Weight:
a. Accessory/tool: 89 Kg
b. Packed accessory/tool: 122 kg
4. INSTRUCTIONS FOR HANDLING OF
THE PACKAGING AND MACHINE
DANGER!
Always wear safety shoes and gloves
for all handling operations.

4.1. PACKAGING HANDLING

To remove the packaging, use a forklift
truck with forks as shown in
weight of the packaging with the machine
inside is specified in the paragraph called
"Machine Specifications".

4.2. UNPACKING THE MACHINE

The machine is supplied packaged unless
agreed otherwise.
How to remove it from the packaging:
• Remove the wooden struts in the
four corners of the packaging.
• Cut or tear the cardboard at the
base of the pallet and remove it com-
[ fig. 04]
[ fig. 04 ] . The
EN-7