Setting The Cleaning Controls; Breakaway Floor-Tool - Numatic TT 4045 Mode D'emploi

23
Care must be taken to reduce speed when cornering or when manoeuvring around obstacles.

Setting the cleaning controls

Ensure your TT machine has been plugged into a suitable power supply.
Select the desired function using the On / Off switches fitted to the handle.
To start: hold down either trigger and
press the yellow On / Off Switch once
1

Breakaway floor-tool

The floor-tool design incorporates a safety knock-off feature.
Allowing it to safely disengage from its mounting should it
become caught on an obstruction, during forward machine
movement.
To re-attach the floor-tool blade to its holder, first loosen the
retaining knobs on the floor-tool body and slide onto the
holding bracket.
Tighten retaining knobs to finger tight (See Fig.23).
Note:
2
26
1