Deactivating The Childproof Lock; Basic Settings; Overview Of The Basic Settings; Changing The Basic Settings - CONSTRUCTA CC4W91962 Manuel D'installation

en Basic settings
11.2 Deactivating the childproof lock
12 Basic settings
You can configure the basic settings for your appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
1
Factory setting (may vary according to model)
12.2 Changing the basic settings
Requirement: The appliance must be switched off.
1.
Press and hold for a few seconds.
a The first basic setting is shown on the display.
2. Use the settings area to change the basic setting.
3. Press ⁠ .
a The next basic setting is shown on the display.
4.
Use to select all of the required basic settings
and change the values.
54
Basic setting
Signal duration
Button tone
Display brightness
Time indicator
Interior lighting
Factory setting
Demo mode
Signal volume
▶
Press and hold
a The control panel is unlocked.
Selection
= short = 10 seconds
= medium = 30 seconds
= long = 2 minutes
= off
1
= on
= low
1
= medium
= high
= off
1
= on
= off
1
= on
1
= off
= on
1
= off
= on
= low
1
= medium
= high
5. To save the changes, press and hold
seconds.
Note: The changes to the basic settings will be re-
tained even after a power cut.
12.3 Discarding changes to the basic
settings
▶
Press ⁠ .
a All changes are discarded and not saved.
for approx. 4 seconds.
Description
Signal duration after a
1
cooking time has elapsed
or the timer is set.
Switch the button tones on
or off.
Set the brightness of the
display.
Show the clock time in the
display.
Switch the interior lighting
on or off.
Reset the changed settings
to the factory settings.
Switch demo mode on or
off.
Note: Demo mode is only
visible in the first 5 minutes
after connecting the appli-
ance to the mains.
Setting the signal volume.
for a few