Before Using For The First Time; Cleaning The Appliance Before Using It For The First Time; Cleaning The Accessories; Basic Operation - CONSTRUCTA CC4W91962 Manuel D'installation

6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Performing the initial configuration
After connecting the appliance to the power supply or
following a power cut, the following prompt appears in
the display for the setting the time. It may take a few
seconds for the prompt to appear.
▶
Connect the appliance to the power supply.
a ⁠ ⁠ : flashes in the display and
Setting the time
1. Set the time in the settings area.
2. Press ⁠ .
a The time is set.
Note: In order to reduce the energy consumption of
your appliance in standby, you can hide the time.
7 Basic operation
7.1 Switching on the appliance
▶
Press to switch on the appliance.
a The appliance is ready to use.
a A default value appears in the display.
7.2 Switching off the appliance
Switch your appliance off when you are not using it. If
no settings are applied for an extended period, the ap-
pliance switches itself off automatically.
▶
Press to switch off the appliance.
a The appliance stops any ongoing functions.
a The display shows the time.
a Some displays also remain visible in the display
when the appliance has been switched off.
lights up.
Before using for the first time en
The image shows the
6.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1.
Make sure that there is no leftover packaging, ac-
cessories or other objects in the cooking compart-
ment.
2.
Close the appliance door.
3. Press ⁠ .
Keep hot air as the default value.
4.
Press ⁠ .
5. Set the temperature to 180 ºC using the settings
area.
6. Press ⁠ .
a The appliance starts.
7. After one hour, press
8. Press to switch the appliance off.
a The appliance is cleaned.
a The appliance is switched off.
6.3 Cleaning the accessories
▶
Clean the accessory thoroughly with soapy water
and a soft dish cloth.
7.3 Setting the type of heating and
temperature
1. Use the function selector to set the required type of
heating.
a A default value appears in the display.
2.
If necessary, change the settings. To do this, touch
the appropriate field and use the rotary selector to
change the value.
3.
Press ⁠ .
a The appliance starts.
lights up.
a
a With a type of heating with temperature, the temper-
ature display lights up gradually.
4.
If necessary, use the rotary selector to change the
temperature while the oven is in operation.
position.
⁠ .
47