CONSTRUCTA CC4W91962 Manuel D'installation page 50

en Microwave
1.
Read the safety instructions → Page 40 and the sec-
tion on how to prevent material damage → Page 42.
2. Read the information on microwave-safe cookware
and accessories. → Page 49
3.
Press ⁠ .
a The appliance is ready to use.
a The display shows the maximum microwave power
setting of 900 watts as the default value.
4. Set the required microwave power setting using the
settings area.
a The display shows the microwave power setting and
a default cooking time.
5. Press ⁠ .
6. Set the required cooking time using the settings
area.
7. Press to start.
You can change the cooking time at any time during
operation in the settings area.
a The cooking time starts to count down and the mi-
crowave starts.
lights up.
a
a Once the cooking time has elapsed, the microwave
stops and a signal sounds.
8.
When the dish is ready, open the appliance door or
press any field.
8.5 Intervals for the time settings
The interval for setting a cooking time in microwave op-
eration changes with the length of the cooking time.
Cooking time
0–1 minutes
1-3 minutes
3–15 minutes
15 minutes – 1 hour
1 hour –
1 hour 30 minutes
8.6 Changing the microwave power
1. Press ⁠ .
2.
Set the required microwave power setting using the
settings area.
If the microwave function is only added after start-
ing, the appliance pauses. Press
8.7 Pausing operation
You can pause operation at any time.
1. Press or open the appliance door.
a Operation is paused.
flashes.
a
2.
To continue operation, close the appliance door and
press ⁠ .
a Operation continues.
lights up.
a
8.8 Stopping operation
You can stop operation at any time.
▶
Press ⁠ .
50
Interval
5 seconds
10 seconds
30 seconds
1 minute
5 minutes
to start.
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
8.9 MicroCombi
To reduce the cooking time, you can use certain of the
types of heating in combination with microwave mode.
MicroCombi mode can be used with the following
types of heating:
Hot air
¡
Hot air grilling
¡
Grill
¡
Exceptions:
Microwave power setting 900 W
¡
Hot air 40 °C
¡
Warming plates
¡
Configuring MicroCombi mode
Switch on microwave mode in addition to a type of
heating.
1.
Press ⁠ .
a The appliance is ready to use.
a The display shows the maximum microwave power
setting of 900 watts as the default value.
2. Set the required microwave power setting using the
settings area.
a The display shows the microwave power setting and
a default cooking time.
3. Press ⁠ .
4. Select a combinable type of heating using the set-
tings area.
a A default value for the temperature is displayed.
5.
Press ⁠ .
6.
Set the temperature using the settings area.
7.
Press ⁠ .
8. Set the required cooking time using the settings
area.
9. Press to start.
a The cooking time counts down and MicroCombi
mode starts.
a Once the cooking time has elapsed, MicroCombi
mode ends automatically and a signal sounds.
Changing the microwave power
1. Press ⁠ .
2. Set the required microwave power setting using the
settings area.
If the microwave function is only added after start-
ing, the appliance pauses. Press
Pausing operation
You can pause operation at any time.
1. Press or open the appliance door.
a Operation is paused.
flashes.
a
2. To continue operation, close the appliance door and
press ⁠ .
a Operation continues.
lights up.
a
Stopping operation
You can stop operation at any time.
▶
Press ⁠ .
to start.