Time-Setting Options; Changing The Time; Cooking Time; Childproof Lock - CONSTRUCTA CC4W91962 Manuel D'installation

10 Time-setting options
Your appliance features time-setting options that you
can use to set the cooking time and the timer.
10.1 Checking the time-setting options
Requirement: If multiple time-setting options are set,
the corresponding symbols light up. During operation,
the timer and cooking time are available. In standby,
the timer and the time are available.
▶
Press until , or
a The respective value is shown in the display.
10.2 Changing the time
Requirement: To change the time on the clock, the ap-
pliance must be switched off.
1. Press twice.
and the time appear on the display.
a
2. Set the time in the settings area.
3.
Press ⁠ .
a The time is set.
a If is not pressed, the set value is applied after a
few seconds.
Note: In order to reduce the energy consumption of
your appliance in standby, you can hide the time.
10.3 Cooking time
You can set a time after which operation ends automat-
ically. The maximum cooking time is 23 hours and 59
minutes.
Setting the cooking time
1. Set the type of heating and temperature.
2. Press until is in focus.
3.
Set the required cooking time using the settings
area.
4. Press ⁠ .
a The appliance starts.
lights up.
a
a You will see the cooking time counting down.
Ending the cooking time
Requirement: A signal sounds. The appliance stops
heating. ⁠ ⁠ : is shown in the display.
1.
Press ⁠ .
a The signal is switched off.
2. Press ⁠ .
a The appliance is switched off.
11 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
11.1 Activating the childproof lock
Requirement: The appliance is switched off.
▶
Press and hold
is in focus.
for approx. 4 seconds.
Changing the cooking time
▶
Use the settings area to change the cooking time.
a After a few seconds, the display shows the changed

cooking time.

a You will see the cooking time counting down.
Clearing the cooking time
1. If the timer function has been set, press
2.
Use the settings area to set the cooking time to ⁠ ⁠ :
⁠ ⁠ .
a After a few seconds, the cooking time is cleared.
The appliance does not interrupt operation.
10.4 Timer
You can set the time on the timer. Once this time has
elapsed, a signal tone sounds. You can set a maximum
time on the timer of 24 hours.
The function works independently of the operation and
other time-setting options. The timer signal is different
from other signals.
Setting the timer
1.
Press until is in focus.
2. Use the settings area to set the required timer dura-
tion.
a After a few seconds, the appliance displays the set
timer duration.
a The timer starts.
lights up in the display.
a
a You will see the timer duration counting down.
Ending the timer
Requirement: A signal sounds. ⁠ ⁠ :
display.
▶
Press any symbol.
a The timer is switched off.
Changing the timer
▶
Use the settings area to change the required timer
duration.
a After a few seconds, the appliance displays the set
timer duration.
Cancelling the timer
▶
Use the settings area to set the timer duration to
⁠ ⁠ .
a The timer is switched off.
a The control panel is locked.
a The symbol appears in the display.
a If a timer duration has been set, this continues to
count down. While the childproof lock is active, the
timer duration cannot be changed. Signal tones,
e.g. when the timer duration has elapsed, can be
ended by pressing any button
Time-setting options en
⁠ .
is shown in the
53
: