Application Ranges; Maximum Allowable Pressure - Bitzer LHL3E/2EES-2Y Instructions De Service

Component
1 Compressor, semi-hermetic
1a Discharge gas shut-off valve
1b Suction gas shut-off valve
2 Condenser, air-cooled
2a Condenser fan
3 Condensate line
4 Liquid receiver
4b Ball valve
5a Terminal box/controller of
the condensing unit
6 Discharge gas line
8 Oil separator
8a Oil monitoring OLC-K1
9 Check valve
10 Liquid line
11 Filter drier
12 Sight glass
13 Suction gas line (insulated)
18 HP limiter/ HP cut-out
19 LP limiter
22 Discharge gas temperature
sensor
23 Suction gas temperature
sensor
25 CRII capacity control
1 x standard for
LHL3E/2EES-2Y ..
LHL5E/4CES-6Y
1 x standard + 1 x option for
LHL5E/4FES-3Y ..
LHL5E/4CES-6Y
26 Ambient temperature sensor
Tab. 2: Legend and state of delivery ECOLITE condensing units
8

5 Application ranges

Scope of delivery
Stand. Opt.
Permitted refrigerant
x
x
x
Oil charge ①
x
Maximum allowable pres-
x
sure (PS)
x
Maximum permitted ambi-
x
ent temperature
x
For application limits, see brochure KP-104 or BITZER
x
software.
① For alternative oils, see Technical Information
x
KT-510.
x
x
x
x
x
x
x

5.1 Maximum allowable pressure

x
The whole system must be designed and operated
x
such that the maximum allowable pressure (PS) cannot
x
be exceeded in any part of the system (see name plate
details).
x
Pressure relief valves on receivers (pressure vessels)
are absolutely necessary if:
x x
• it is to be expected that the maximum allowable
• the entire refrigerant charge of the system is more
x
• the entire refrigerant charge of the system is more
• a check valve is located between condenser and re-
Safety switching devices
According to local regulations, additional pressure-limit-
ing safety devices must be provided.
WARNING
Risk of bursting due to counterfeit refrigerants!
Serious injuries are possible!
Purchase refrigerants only from reputable man-
ufacturers and reliable distributors!
pressure will be exceeded due to external heat
sources (e.g. fire).
than 90% of the pressure vessel volume at 20°C (ca-
pacity). The vessel volume is defined as the volume
between the valves upstream and downstream of a
pressure vessel lockable during normal operation.
than 90% of the pressure vessel volume at 20°C (ca-
pacity). The vessel volume is defined as the volume
between the valves upstream and downstream of a
pressure vessel lockable during normal operation.
ceiver.
R134a, R404A, R407A,
R407C, R407F, R448A,
R449A, R450A, R507A,
R513A, R22
t < 70°C BITZER BSE32
c
LP: 19 bar, HP: 32 bar
-20°C .. +50°C
KB-206-1