Bitzer LHL3E/2EES-2Y Instructions De Service page 21

Menu item
Modbus:
(read and write)
F4⇒CLOC⇒YEAr
Modbus:
(read and write)
F4⇒CLOC⇒UPdA
Modbus:
(read and write)
F4⇒CLOC⇒rEAd
Modbus:
(read and write)
The ECOLITE controller is equipped with a buffered in-
ternal clock with date function, which can be adjusted
by the user, if necessary.
Menu item
F4⇒AL⇒F1 or F3
Modbus:
(read only)
The parameter AL includes the number(s) of active
alarms. If several alarms are active, it is possible to
switch over between the messages by pressing the F1
or F3 key. If no message is active, the parameter AL
cannot be opened by pressing the F4 key.
KB-206-1
Function
0 – 12
Setting of ECOLITE controller date – year
0 – 99
Setting of ECOLITE controller date and time – transfer
0 = no transfer of values
1 = values are transferred
Setting of ECOLITE controller date and time – update
0 = no update of the values
1 = values are updated
Function
Display of the currently active alarm
Display of ErrXX in case of an alarm
XX = number of the alarm message
Display of the active alarm:
21