Fuel Pump; Exhaust System - Briggs & Stratton 555700 Guide

FUEL PUMP

The following diagram
recommended layout for attaching the fuel
pump to your World Formula racing engine.
A Mikuni fuel pump is supplied. The fuel
pump should be installed as recommended
by your local CIK organization. We
recommend that this fuel pump be placed
in a location that isn't affected by heat. The
pulse line is marked with a "P" on the fuel
pump. This should be connected with a
non-collapsible fuel line (specifically made
for fuel applications) to the fitting on the
top of the intake manifold. The other two
fittings on the fuel pump have arrows to
show the inlet and outlet of the pump.
Please refer to the accompanying diagram.
CAUTION: WE HIGHLY RECOMMEND
THAT YOU USE A 75 MICRON FUEL
FILTER. THIS SHOULD BE PLACED IN-LINE
BETWEEN THE TANK AND THE FUEL
PUMP.
shows the
PULSE LINE
FUEL FILTER
REMOTE
FUEL
SOURCE
FUEL PUMP 808656
PULSE FITTING
Fuel Pump

EXHAUST SYSTEM

The header pipe has been tuned and
designed to be run with the following
parts:
A) 50 mm diameter x 57 mm length flex
coupling (not included)
B) CIK approved 50/90 "2-stroke" muffler
(not provided)
C) Three (3) exhaust springs (not provided)
REAR KART BRACKET SUPPORT
FLEX COUPLING
EXHAUST SPRINGS
Exhaust System