Electrical Schematic - Briggs & Stratton 555700 Guide

CONGRATULATIONS on your purchase of
a Briggs & Stratton World Formula Racing
Engine. This engine has been designed for
sanctioned racing only and for use at only
sanctioned tracks. It is vital for the longevity
and dependability of this product that you
read the following, as the initial usage of
this engine will affect its life overall.
WE RECOMMEND that all modifications
and setup of this engine be done by a
reputable source of supply with the proper
knowledge needed to work on a racing
engine.
CAUTION: This engine is shipped without oil.

ELECTRICAL SCHEMATIC

This system is designed for a 12-volt power
supply. For most racing applications, a high-
quality, gel cell battery (determined by your
authorized sanctioning body) with at least
an 8-amp hour rating is recommended. An
8mm positive battery cable is required
between the battery and starter solenoid.
12V BATTERY
Electric Starter Wiring Schematic
The rocker switch, Part #555564, will turn
the ignition OFF, and is located on the
plastic engine cover, Part #555570.
See starter wiring schematic for starter
switch and battery cable connections.
STARTER SWITCH
TO ENGINE MOUNTING
STARTER AND SOLENOID