Technical Data And Measuring Tolerances - VOLTCRAFT LCR 4080 Notice D'emploi

Technical Data and Measuring Tolerances

A Technical Data
Display ......................................: two 4
Maximum measuring rate .........: 1 measurement per second
Overload display .......................: ".OL" for Overload is displayed
Automatic Power Off APO ........: APO for Automatic Power Off, can be de-
Operating temperature..............: 0°C to +50°C
Relative humidity in air..............: 0 to 80%, not condensating
Storage temperature
(battery removed)......................: - 20°C to + 60°C, with a rel. hum. of 0 to
Temperature for guaranteed
precision ...................................: +23°C ±5 K
Low battery signal.....................: "
Battery type ..............................: NEDA 1604 9V or 6F22 9V (alcaline)
Current consumption ................: approx. 10 mA to approx. 30 mA
External power supply ..............: nom. 12 V DC, min. 50 mA, polarity "+" inside
Fuse, defect signal....................: 100 mA, fast 250 V, usual denomination
Weight.......................................: 365 g (including battery and rubber holster)
Dimensions (L x W x H).............: 192 x 91 x 52.5 mm (without rubber holster)
/ digit displays up to 19999 with sym-
1
2
bol display and measuring units
activated, and does not function when the
interface is operated, in the MIN-MAX func-
tion and when supplied by an external
adapter.
The measuring instrument will switch off
automatically, when it is not used for about
10 minutes. To switch in on
again, press the power button
80%
" from approx. under 7 V battery
- +
voltage
or MN 1604 (=PP3)
F0.1/250V (5 x 20 mm).
When the fuse is defective, you will hear an
uninterrupted signal sound when you switch
on the instrument, and "FUSE" will appear in
the display.
41