VOLTCRAFT LCR 4080 Notice D'emploi page 43

mH = micro-Henry = 10 exp. -6; mH = milli-Henry = 10 exp. -3; H = Henry = As/V
For the tolerance the respective inductor value "Lx" divided by 10000 in
brackets must be added.
=========================================================
Resistance
Voltage at the open measuring circuit: approx. 550 mV with 120 Hz test fre-
=========================================================
C Maximum input values
Measuring resistors....................: max. 10 MOhm
Measuring capacitors.................: max. 10 mF
Measuring inductors ..................: max. 10000 H
2000 mH
20 H
200 H
2000 H
20 Ω
200 Ω
2 kΩ
20 kΩ
200 kΩ
2 MΩ
10 MΩ
±(0.7%+5dgts) 100 µH
±(0.7%+5dgts) 1 m H
±(1,0%+5dgts) 10 mH
not specified
±(1.2%+8dgts) 1mΩ
±(0.8%+5dgts) 10 mΩ
±(0.5%+3dgts) 100 mΩ
±(0.5%+3dgts) 1 Ω
±(0.5%+3dgts) 10 Ω
±(0.5%+5dgts) 100 Ω
±(2.0%+8dgts) 1 kΩ
quency, and 350 mV with 1 kHz test
frequency
---
---
open
100 mH ---
short-circuit
short-circuit
---
---
---
open
open
43