Technical Data And Measurement Tolerances - VOLTCRAFT VC-160 Notice D'emploi

Table des Matières

Publicité

Do not use any carbonaceous cleaning agents or
petrol, alcohol or similar for cleaning. They may
attack the surface of the unit. Additionally, the fu-
mes are explosive and damaging to health. Do not
use any sharp-edged tools, screwdrivers, metal
brushes or similar for cleaning..

Technical data and measurement tolerances

Technical data
Display ....................................: 3 3/4-digit LCD display up to 3999,
Max. measurement rate ..........: 2.5 measurements per second
Max. input current....................: 10 A DC or AC rms
Operating temperature.............: 0°C to + 40°C
Storage temperature ................: -10°C to +50°C
Relative humidity......................: max. 80 % (up to 31°C),
Temperature for guaranteed
accuracy ..................................: +23°C ±5 K (K = Kelvin)
Battery type ..............................: 2 x 1.5V AAA batteries
Weight.......................................: approx. 150 g (without
Dimensions (B X H X T) ............: approx. 74 x 129 x 39 mm
Measurement tolerances
Statement of accuracy in ± (% of reading + number of digits =
digits (dgt) )
Accuracy for 1 year at a temperature of +23°C ±5K, at a relative
humidity of less than 75%. The warm-up time is approx. 1 minute.
44
with automatic polarity indicator
and 12mm-high digits
non-condensing
falling linearly to max 50%
(31°C to 40°C), non-condensing
accessories)
(without cables)
Never operate the measuring instrument in an ope-
ned condition. Danger to life!
Do not leave used batteries in the measuring instru-
ment, because even leak-proof batteries can corro-
de and thereby release chemicals, which are both
damaging to health and can destroy the battery
compartment.
Disposal of used batteries/accumulators
As an end user you are committed by law (battery sta-
tutory regulation) to giving back all the used batteries
and accumulators. It is not permitted to throw them in-
to the domestic dustbin. Batteries/accumulators that
contain harmful substances are marked with the oppo-
site symbols. These symbols indicate that it is not per-
mitted to throw the batteries/accumulators into the
domestic dustbin. The symbols for the decisive heavy
metal are: Cd = cadmium, Hg = mercury, Pb = lead.
Give back your used batteries/accumulators at the
collecting boxes provided by your municipality, at our
branches or at the shops that sell batteries/accumulators.
You meet the statutory requirements and make your
contribution to the environmental protection.
b) Changing fuses
Make sure that only fuses of the given types and
nominal current ratings are used as replacements.
The use of repaired fuses or the bridging of fuse
holders is not permitted.
To change the mA current range fuse, disconnect the measuring in-
strument from the circuit being measured and switch it off. Remove
all connected leads and test probes. Take a suitable crosspoint
screwdriver and carefully open the instrument case, as described
33

Publicité

Table des Matières
loading

Table des Matières