BONFIGLIOLI Active Energy Control Device Serie Guide De Démarrage Rapide page 85

Connection of sine filter, size 8
Figure 4-5: Connection of mains unit sine unit, size 8
For information on how to connect the device, refer to Chapter
"Conductor
instructions document.
4.5 Feed-back unit power connection
The feed-back unit is integrated in a system typically comprising the following
components:
 Feed-back unit AEC
 Line chokes
 Radio interference filter
 Frequency inverter
 Asynchronous motor or synchronous motor
 (shielded) mains cable
 Shielded control cables
 Metal mounting plate
 In addition to the components listed above, a precharging circuit must be
provided.
06/19
L1 L2 L3
cross-section" and
Quick Start Guide AEC
the applicable
GB
operating
83