BONFIGLIOLI Active Energy Control Device Serie Guide De Démarrage Rapide page 57

 Before commissioning and the start of the operation fix all covers,
assemble all components of the standard equipment and check the
terminals.
 No connection work may be performed, while the power supply is switched
on.
 Do not touch terminals before capacitors have discharged. Do not touch
the heat sink during operation as there is a risk of skin burn due to high
temperature.
 Do not remove covers during operation.
 Please note, that Bonfiglioli Vectron does not assume any responsibility for
the compatibility of external products (e.g. motors, cables, filters, etc.).
Using the device in combination with external products is carried out at
your own risk.
 Do not touch electronic components or contacts.
 Do not operate damaged or destroyed components.
 Repairs may only be carried out by the manufacturer or persons who are
authorized by the manufacturer.
 Repairs must be carried out by qualified electrotechnical experts.
 Do not modify the mains unit in any way not explained in this
documentation.
 Do not connect an inappropriate voltage supply.
 Keep the manual accessible to the operators.
For more information about the range of functions of the device and
about operation, maintenance and storage, refer to the applicable
operating instructions document.
06/19 Quick Start Guide AEC
GB
55