BONFIGLIOLI Active Energy Control Device Serie Guide De Démarrage Rapide page 58

1.2 Designated use
The product is an electrical drive component. It is applicable for
 installation in machines or electrical plants
 industrial environments
1.3 Transport and storage
 Ambient temperature:-25 ... 55 °C
GB
 Relative humidity:
 Store in original packaging in dry rooms without dust.
 Avoid high temperature variations.
 Connect to mains voltage for 60 minutes after one year of storage before
use.
1.4 After unpacking
 Make sure that the delivered product is the part you have ordered.
 Check if the product is damaged and make sure that the delivery is
complete.
 File complaints with the supplier immediately.
1.5 Place of installation
 In rooms without weather exposure.
 Avoid direct sunlight exposure.
 Avoid dust.
 Keep away from strong electromagnetic fields.
 Keep away from combustible material.
 Provide sufficient cooling. Install fans when installing the frequency
inverter inside an enclosed cabinet.
 Altitude: ≤4000 m, over 1000 m with derating (output current reduction).
 The degree of protection of the device is IP20. Use of the device in
explosive atmospheres is not permitted.
1.6 Operational conditions
 Ambient temperature: 0 ... 40 °C
 Relative humidity:
 Ambient pressure:
 During Standard operation leakage currents > 3.5 mA can occur.
56
5 ... 95%, free of condensation.
maximum 85%, free of condensation
70 ... 106 kPa
Quick Start Guide AEC 06/19