Controls And Connections; Front View - Tripp-Lite B007-008 Manuel D'utilisation

Controls and Connections

B007-008 Front View:
1. Status LEDs:
On Line: Lights ORANGE when the attached PC is ON. A flashing LED
indicates that that port is being used as a cascade port and has another
KVM Switch connected to it.
Selected: Lights GREEN to indicate which port is currently selected. The LED
will be flashing when the port is being accessed under the Auto Scan
Mode.
2. Port Selection Switches
Press a switch to access the PC attached to the corresponding port.
•
Pressing Port 1 and Port 2 simultaneously for 3 seconds performs a
Keyboard/Mouse Reset
•
Pressing Port 7 and Port 8 simultaneously starts the Auto Scan Mode
3. Reset Switch
The recessed reset switch can be pressed using a thin object such as a paper clip or
ballpoint pen. A warm reset is initiated when this switch is pressed and released. A
cold reset is initiated when this switch is kept pressed for longer than 3 seconds.
4. Sound Opening
System sounds (beeps) are emitted from this opening
5. Power LED
Lights to indicate that the unit is receiving power.
1
2
- 3 -
3 4 5