Hardware Requirements; Console; Cables - Tripp-Lite B007-008 Manuel D'utilisation

Hardware Requirements:

Console

•
A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will
be using on any of the PCs.
•
A PS/2 Style Mouse
•
A PS/2 Style Keyboard
PC
Each PC must have:
•
A VGA, SVGA or Multisync card.
•
Either a 6-pin mini-DIN (PS/2 style) or DB-9 (standard serial) mouse port.
•
Either a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and
Ground on pin 3, or a 5-pin DIN (AT Style) keyboard port with +5V DC on pin 5 and
ground on pin 4.

Cables

The following are the cables to connect your KVM Switch to the CPUs or to Cascade
KVM Switches:
P754-006
P754-010
P754-015
Note: The wiring and pin assignments will not let you to use a Serial-to-PS/2 adapter at
the KVM side of the cable. Attempting to use a standard serial extender cable
with adapters at both ends will fail.
PS/2 Cable Kit – 6'
PS/2 Cable Kit – 10'
PS/2 Cable Kit – 15'
- 2 -