Tripp-Lite B007-008 Manuel D'utilisation page 17

• F4 QV:
Broaden or narrow the number of ports that get scanned by using the QV (Quick View
Scan) function. [F4] is a toggle that selects or deselects the currently highlighted port for
the Quick View Scan function (see F2, above). To select/deselect a port for QV:
1. Use the Up and Down Arrow Keys to move the highlight bar to the port.
2. Press [F4].
An arrowhead in the QV column indicates when a port has been selected for Quick View
Scanning.
• F5 Name:
Every port can be named. The Name function allows you to name (or rename) the
currently highlighted CPU Port. To edit a Port Name:
1. Use the Navigation Keys to move the highlight bar to the port you want (you can use
the F3 List function to broaden or narrow the port selection list).
2. Press [F5].
3. Key in the new Port Name.
The maximum number of characters allowed is 15. Legal characters include:
Š
All alpha characters: a - z; A - Z
Š
All numeric characters: 0 - 9
Š
+, -, /, :, ., and Space
Case does not matter; OSD displays the Port Name in all capitals no matter how they
were keyed in.
4. Press [Enter] to have the change take effect or press [Esc] to abort.
• F6 Set:
[F6] allows you to configure the OSD settings. To change a setting, use the Up and Down
Arrow Keys to move the highlight bar to it, then press [Enter]. On the submenu that
appears next, move the highlight bar to your desired choice and press [Enter]. An icon
appears before the choice to indicate that it is the currently selected one.
- 15 -