Osd Navigation; Osd Main Menu Headings; The Function Keys - Tripp-Lite B007-008 Manuel D'utilisation

OSD Navigation

•
[Esc] cancels the current selection, or dismisses the current menu and moves back to
the menu one level above. If you are at the highest menu level, it deactivates OSD.
•
Use the Up and Down Arrow Keys to move up or down through the list one line at a
time
•
Use [Pg Up] and [Pg Dn] to move up or down through the list one screen at a time
Click on xzWRPRYHXSRUGRZQWKURXJKWKHOLVWRQHOLQHDWDWLPH
•
Click on ÏÐ to move up or down through the list one screen at a time
•
•
To activate a port, move the Highlight Bar to it then press [Enter].
•
After executing any action, you automatically go back to the menu one level above.

OSD Main Menu Headings:

PN Lists the Port ID numbers (Station Number – Port Number) for all the
CPU Ports on the installation. To access a particular PC, use the
Navigation Keys to move the Highlight Bar to the desired location and
then press [Enter].
QV Ports that have been selected for Quick View Scan Mode (see F2 and F4
below) are identified by an arrowhead in this column.
PC Lists all the PCs that are Powered On and are On Line.
NAME If a port has been given a name (see F5 below), the name appears in this
column.

The Function Keys:

Function Keys bring up submenus that are used to configure and control the OSD.
• F1 GoTo:
Pressing [F1] allows you to switch directly to a port by the following methods:
a) Move the Highlight Bar to the desired port and press [Enter].
b) Key in the Port ID or Name, then press [Enter].
Note: GoTo narrows the list of available choices as you type the name. For example, if
the first letter you type is "a", the list only displays those ports whose names begin with
"a". If the next letter you type is "b", the list is further narrowed down to only those ports
whose names begin with "ab", etc.
To return to the OSD Main Menu without making a choice, press [Esc].
- 13 -