Mounting And Stacking Instructions - Tripp-Lite B007-008 Manuel D'utilisation

Mounting and Stacking
For convenience in large installations, the unit is supplied with the necessary hardware
for it to be rack mounted in a 19" (1U) system rack, or stacked.
 For Rack Mounting:
1. Screw the mounting brackets into the sides of the unit.
2. Slide the unit into the rack and secure it to the rack.
 For Stacking:
1. Screw the stacking brackets into the corners of the unit. Note that there is a top and
bottom half to each bracket. The bottom half has a concave surface and two screw
holes; the top half has a convex surface and one screw hole.
2. Line up the four bottom brackets of the top unit with the four top brackets of the
bottom unit.
3. Fit the top unit into place.
- 19 -