Tripp-Lite B007-008 Manuel D'utilisation page 18

The settings are explained in the table below:
Setting
Channel Display Mode
Channel Display
Duration
Channel Display
Position
Scan Duration
OSD Activating Hotkey
Set Password
Clear Name List*
Restore Default
Values*
Lock Console*
* If a password has been set, these settings require you to supply a proper password in
order to access them. See the OSD Security section, below, for details.
Selects how the Port ID is displayed. There are three choices:
Number plus the Name (PN + NAME), Number alone (PN) or
Name alone (NAME).
Determines how long a Port ID is displayed. There are two
choices: 3 seconds and always on.
Allows you to position the Port ID on the screen. After you
highlight this item and press [Enter], the menu disappears and the
port ID is displayed. Use the arrow keys, Pg Up, Pg Dn, Home
and 5 (on the numeric pad with the Num Lock off) to position the
port ID display then press [Enter] to lock the position and return to
the Set Submenu.
Determines how long the display dwells on each Port when it
cycles through the selected Ports in the Quick View Scan Mode.
The available options are: 3, 5,10, 15, 20, 30, 40 and 60 seconds.
Selects which Hotkey combination will activate the OSD function:
[Ctrl] [Ctrl] or [Scroll Lock] [Scroll Lock]. The default is the Ctrl
key combination, but this may conflict with programs running on
the computers, in which case, the Scroll Lock option should be
selected.
Allows you to set a password in order to control access to
Locking/Unlocking the Console (see the OSD Security Features
section, below, for details).
Clears all the Port Names from the Name List. You will be asked
to Confirm before the procedure takes place. A message will be
displayed while the Names are being cleared. Once the Names
have been cleared, a message will appear indicating that the
procedure was completed successfully.
Clears all the Settings from the memory and returns the unit to the
factory settings. You will be asked to Confirm before the procedure
takes place. A message will be displayed while the Settings are
being cleared. Once the Settings have been cleared, a message
will appear indicating that the procedure was completed
successfully.
Locks / Unlocks the Console. When the Console is locked, only
the current monitor screen displays. Attempts to input information
from the console have no effect; attempts to switch to a different
port, either from the Console or by pressing the manual switches,
have no effect either. The only way to regain access to the
computers is by Unlocking the Console. If a password has been
set, you must provide the password in order to Lock / Unlock the
Console. If no password has been set, pressing [Enter] will Lock /
Unlock the Console.
- 16 -
Function