Arcam HDA SA30 Manuel page 21

STB
STB Device Mode
The STB Device Mode button selects STB as the source.
If configured to work with your set top box decoder or
similar device, the remote can subsequently control the
device.
Toggles power between standby and on.
0...9 Functions as original remote number key
DISP Display INFO or OSD (On Screen Display)
function, if available.
MODE
Selects the or function.
Fast rewind/forward.
Channel down/up.
Stop playback.
Start Playback
Pause playback.
Record.
INFO Opens the EPG (Electronic Program Guide)
on some satellite and cable set top boxes.
POP UP Turns on the
function if the set top
box uses this feature.
Navigate setup and programme selection
menus.
OK confirms a selection (equivalent to 'Enter'
or 'Select' on some remotes).
Returns navigation to the top level of the
menu (' ').
AUDIO Selects the function.
AMP Resets remote to AMP mode.
RED RED button for set top box.
GREEN GREEN button for set top box.
YELLOW YELLOW button for set top box.
BLUE BLUE button for set top box.
SAT
SAT Device Mode
The SAT Device Mode button selects SAT as the source.
If configured to work with your satellite receiver, the
remote can subsequently control the device.
Toggles power between standby and on.
0...9 Functions as original remote number key
DISP Display INFO or OSD (On Screen Display)
function, if available.
Channel down/up.
INFO Displays programme information.
POP UP Guide (or Setup on some set top boxes).
Navigate setup and programme selection
menus.
OK confirms a selection (equivalent to 'Enter'
or 'Select' on some remotes).
Returns navigation to the top level of the
menu (' ').
RTN Back.
AMP Resets remote to AMP mode.
RED RED button for Satellite.
GREEN GREEN button for Satellite.
YELLOW YELLOW button for Satellite.
BLUE BLUE button for Satellite.
PVR
PVR Device Mode
The PVR Device Mode button selects PVR as the source.
If configured to work with your personal (hard disc)
video recorder or similar device, the remote can
subsequently control the device.
Toggles power between standby and on.
0...9 Functions as original remote number key
INFO Display INFO or OSD (On Screen Display)
function, if available.
MODE Selects the or function.
Fast rewind/forward.
Channel down/up.
Stop playback.
Start Playback
Pause playback.
Record.
MENU Opens the EPG (Electronic Program Guide)
on some satellite and cable set top boxes.
POP UP Turns on the function if the PVR uses
this feature.
Navigate setup and programme selection
menus.
OK confirms a selection (equivalent to 'Enter'
or 'Select' on some remotes).
Returns navigation to the top level of the
menu (' ').
AUDIO Selects the
function.
AMP
Resets remote to AMP mode.
RED RED button for PVR.
GREEN GREEN button for PVR.
YELLOW YELLOW button for PVR.
BLUE BLUE button for PVR.
EN-19
EN