Cd Device Mode - Arcam HDA SA30 Manuel

BD
BD/DVD Device Mode
The BD Device Mode button selects BD as the source.
The button is configured to control the BD functions of
Arcam BD players, this can be changed (see "Locking/
Unlocking a specific Device Mode" on page EN-23).
Toggles power between standby and on.
Open/close disc tray.
0...9 Functions as original remote number key
DISP Cycles through the front panel display's
brightness options.
MODE Cycles through the repeat options (track,
disc, etc.).
Fast rewind/forward.
Skip back/forward
Stop playback of a BD or DVD.
Play the current track.
Pause playback.
Start recording (on products that have this
feature).
MENU Disc menu.
POP UP Activates BD/DVD player menu, if available.
Navigate setup and BD/DVD programme
selection menus.
OK selects the highlighted file or enters
the highlighted menu on the screen –
equivalent to 'Enter' or 'Select' on some
remote controls.
BD + ' Power on from Standby
BD + , Standby from Power on
BD + > changes the picture resolution (for
BD, only on the Home screen).
Returns navigation to the top level of the
menu ('Home').
AUDIO Changes audio decode format (Dolby
Digital, DTS, etc.).
AMP Resets remote to AMP mode.
RED RED button for BD
GREEN GREEN button for BD
YELLOW YELLOW button for BD
BLUE BLUE button for BD.
CD

CD Device Mode

The CD Device Mode button selects CD as the source.
The button is configured to control the CD functions of
Arcam CD players, this can be changed (see "Locking/
Unlocking a specific Device Mode" on page EN-23).
Toggles power between standby and on.
Open/close disc tray.
0...9 Functions as original remote number key
DISP Cycles through the front panel display's
brightness options.
MODE Cycles through the repeat options (track,
disc, etc.).
Fast rewind/forward.
Skip back/forward
Stop playback of a CD
Play the current track.
Pause playback.
POP UP In 'normal play' (i.e. the display does not
show the letter P), press the ' and ,
keys to select the track and then
stores the track.
In 'program play' mode, the
deletes the stored track.
Navigate setup and CD programme
selection menus.
OK selects the highlighted file or enters
the highlighted menu on the screen –
equivalent to 'Enter' or 'Select' on some
remote controls.
CD + ' Power on from Standby
CD + , Standby from Power on.
AMP Resets remote to AMP mode.
EN-18
AV
AV Device Mode
The AV Device Mode button configures the remote to
control the functions of a television. Pressing this button
also selects AV as the source.
Toggles power between standby and on.
0...9 Functions as original remote number key
DISP Display INFO or OSD (On Screen Display)
function, if available.
MODE AV; this function is TV specific.
Channel down/up.
INFO Displays picture information; this function is
TV specific.
POP UP Guide.
Navigate setup and programme selection
menus.
OK confirms a selection (equivalent to 'Enter'
or 'Select' on some remotes).
Returns navigation to the top level of the
menu ('Home').
AMP Resets remote to AMP mode.
RED RED key for Text TV
key
GREEN GREEN key for Text TV
YELLOW YELLOW key for Text TV
BLUE BLUE key for Text TV.