Front Panel Connections And Controls - Arcam HDA SA30 Manuel

Front Panel Connections and Controls

VOLUME CONTROL
See "Volume Control" on page EN-13
3.5mm stereo socket, intended for use with headphones.
See "Listening Using Headphones" on page EN-13
The SA30 is designed to run warm in normal use, however
extended use at high volume levels can result in the
amplifier casework becoming hot to the touch.
AUX INPUT
Analogue 3.5mm stereo socket, intended
for connecting an external analogue
source
PHONES AUX MENU INPUT-
PHONES
INPUT+ DIRAC MUTE INFO DIRECT DISPLAY
MENU Opens the setup menu. See "Setup Menu" on page EN-20.
INPUT- / INPUT+
Selects input for listening. See "Selecting An Audio Source" on page EN-12.
DIRAC
Selects the Dirac room EQ curve. See "Dirac Live for Arcam" on page EN-15.
MUTE
Mutes the various audio outputs. See "Muting The Output" on page EN-13.
INFO
Cycles through the information displayed on the lower portion of the front panel display
when on NET and USB inputs.
DIRECT
Enables or disables Analogue Direct listening mode. See "Analogue Direct" on page EN-13.
DISPLAY Adjusts the display brightness. See "Display" on page EN-12.
BAL Adjusts the left/right balance of the output. See "Balance" on page EN-20.
EN-8
POWER INDICATOR AND POWER
SWITCH
See "Switching On" on page EN-12
INTEGRATED AMPLIFIER
POWER
BAL
FRONT PANEL KEYS